Showing posts with label cryptomeria. Show all posts
Showing posts with label cryptomeria. Show all posts

Monday, July 18, 2011

Bonsai tree: Adjusting and Maintaining a Large Cryptomeria

This cryptomeria was one of the standout trees in Boon’s backyard when I studied with him ten years ago. He’s been maintaining it for years. It was originally styled by Mitsuya during one of his visits to the states in the early ’90′s, and is the most significant cryptomeria I’ve seen in the United States. It’s about a meter tall, and has been developing as a bonsai for about twenty years.

One of my clients currently owns this tree and we agreed it was time to wire it again for a bit of reworking. On an established tree like this, such work is done infrequently, while the main yearly task is cutting back the growing shoots. The metabolism of this tree is slower due to its long establishment and so cutting the shoots is only about once a year, as opposed to a younger tree where pinching and cutting might be done several times over a growing season. And also debris, such as dead shoots and the like, are removed from the interior of the foliage pads at the time of shoot cutting, giving it an airy feel after the work is completed.

It is noteworthy American tree with a quiet dignity.


The Before and After photos here are rather subtle, as is commonly the case with such an established tree.


Some of the branch ends were brought down with wire, that was the main work. The wiring just allowed the form and branch structure to be crystalized a bit. In five years, this will have to be done again. And the apex needs to fill out a bit for some density on top.
Read more!

Tuesday, May 3, 2011

Bonsai tree: How to air layer cryptomeria for bonsai

Source: Bonsai Tonight
How to air layer cryptomeria for bonsai

I like cryptomeria bonsai a lot. Unperturbed by the warnings of how much work they can be, I’ve looked for a good specimen with little success for 10-15 years. Maybe they are too much work. Upon hearing that he would no longer be required to maintain a large cryptomeria, Boon Manakitivipart cried out, “I’m free!” Removing a single tree from a collection had added three free days to his calendar this year – and that’s just the time it takes to complete summer cutback.

I knew air layers were a great way to start cryptomeria, or tsugi, bonsai from scratch, so I bought a large tree with straight shoots from Lone Pine Gardens.

Cryptomeria

Cryptomeria

The air layer process is simple – remove bark, pack with moss, keep moist until there are enough roots to support the tree. My best candidate from this tree is a young apical shoot.

Ready to air layer

A great spot for new roots

I begin by cutting two rings around the shoot about an inch apart from each other with a grafting knife. I then remove the bark between the rings.

Removing bark

Removing the bark – note the light colored bark and darker wood below it

Bark removed

Bark removed

This is the trickiest part of the process. It’s important to remove every last bit of bark as leaving any in place will prevent roots from growing in that spot. Once the bark is removed, I cut a sheet of plastic to keep the moss in place.

Plastic wrap

Plastic sheet

Securing plastic with aluminum wire

Securing the base of the sheet with a long piece of aluminum wire.

With the plastic in place, I can start packing the plastic with damp sphagnum moss. I use the white sphagnum moss as it doesn’t turn as moldy as the green moss.

Filling pocket with wet sphagnum moss

Packing the layer with sphagnum moss

Preparing air layer

Almost done

With moss completely surrounding the area where I removed the ring of bark, I wrap up the plastic with the aluminum wire. Toward the top, I leave a gap so I can water the moss as it dries out.

Wrapping plastic with wire

Wrapping the plastic with wire

How long until I can remove the layer? We’ll see. Last year I waited almost a year which turned out to be longer than necessary. I’ll check the roots in a few months and see how they are doing. If there are enough roots, I’ll remove the layer in fall. Otherwise, I’ll wait until early spring.

Air layer complete

Air layer complete

It’s possible that I’ll have close to half a dozen cryptomeria bonsai next year – a good recipe for lots of future work. I’m looking forward to it. Read more!

Wednesday, March 31, 2010

Bonsai tree: Bonsai balance

There are few concepts more central to bonsai than “balance”. The California buckeye below strikes me as a well-balanced composition. The foliage, ramification, trunk, pot and stand all work well together.
California Buckeye – Aesculus californica
The photos here are from the Bay Area Bonsai Associates’ 28th annual show. Like so many good exhibits, it provides ample opportunities for thinking about balance.
The cryptomeria below is a favorite of mine. There are few good examples of the variety around, and only a fraction of these are shohin. When I squint my eyes and focus on the tree’s silhouette, however, I notice that the trunk is surprisingly thin. For the foliage to be balanced with the trunk, I would expect either a thicker trunk or thinner foliage – a subtle point for such a nice specimen.
Cryptomeria japonica
Read more!

Tuesday, March 16, 2010

Bonsai tree: Johnny Uchida Saikei

jonny1

This stellar saikei by Johnny Uchida was sent to us by Noah. Johnny Uchida is the owner of Grove Way Nursery in Hayward, California.
Here what Noah has to say about this planting: “This saikei was done by Johnny Uchida of Grove Way Bonsai as an example for beginning students who were learning to make their own saikeis and he gave me permission to share them. Mr. Uchida is also the sensei of Yamato Bonsai Kai in Northern California. The trees are cryptomeria and hinoki cypress and the composition is made with locally sourced rocks, gravel, moss, lichen and various accent plants.”
Read more!