Bonsai tree: Hinoki workshop

Friday, August 20, 2010

Bonsai tree: Hinoki workshop

Source: Bonsai Tonight
Hinoki workshop

Last weekend I had the opportunity to attend a Bay Island Bonsai workshop run by Daisaku Nomoto. I selected a tree I’ve been working on for the past 15 years – a hinoki. The tree improves every year, but slowly, as hinokis are notoriously slow growing. A year and a half ago, Boon and I performed some heavy bending to get the main branches closer to where we wanted them. This year the work really paid off. Here are some before and after pictures:

Front – before
Front – after
Right – before
Right – after
Left side – before
Left side – after
Back – before
Back – after

The biggest change came when Nomoto removed the first cluster of branches on the left. We discussed this ahead of the workshop and I assented to the cutting. Here’s the branch as it appeared before the workshop with guy wires holding it in place.

Before – guy-wires are doing most of the work

There were two good reasons for removing these branches. First, they blocked the view of the trunk. Second, by replacing branches that grew low on the trunk with branches that emerged higher up, we could bend these branches at a steeper angle. The idea is that older branches tend to hang lower than younger branches.

Removing the branches – stubs will be used for jins

Nomoto removed enough foliage to make a hinoki fan.

Minor cutback and wiring filled the rest of the day. Nomoto moved between workshop participants, cutting, wiring, and offering advice as appropriate. When he got back to me, he typically set a few branches and told me to continue wiring.

Adjusting a branch

Nomoto setting a branch – note use of pliers

Nomoto applying wire

I occasionally looked up from my work to see what else was going on in the workshop. At one point, Nomoto was performing heavy bending with rebar. With a branch in one hand and pliers in another, he kept the rebar in place with his knee.

Heavy bending – prostrata juniper

Fortunately for me, the hinoki needed far less dramatic work, like the plucking of unnecessary foliage.

After setting a branch, Nomoto took care to remove any downward growing foliage. This creates well-defined pads and reveals the age of the tree by exposing the branches that comprise the pads.

Hinoki branch pad

As is often the case in re-stylings, the trick is getting the apex right. While the current silhouette is close to where I want it, some shoots weren’t long enough to fill in where I need them. It’s easy to see this from above.

Seen from above – after re-styling

I’m really happy with the way the tree turned out. For one, it finally approximates the design I had in mind for it 15 years ago. Even better, I now have a tree I can show in Bay Island Bonsai’s upcoming exhibit next January.

Happy with the results – excess foliage cover the turntable

Now 15 years in, I feel like I’m half-way there, and it’s a great feeling.


Michel said...


Nice pictures, Which is refers to the bonsai wire. This site provides how bonsai wire is necessary for a normal plant. Thanks a lot....

Bonsai Wire

Post a Comment